Impuls D1- System amplifier

The completely newly constructed system amplifier D1 of the new ImpulsD amplifier series is the core of our sound systems. Integrated component of the D1 is a digital signal processor for the speakermanagement of the connected systems and the DSP is responsible for to check the status and function of the amplifier. Basic settings as preset election, routing, delay, system and room EQ‘s can be edited with the display and the encoders. The digital signal processing has a resolution of 24bit and works with a sampling frequency of 96 kHz. The user has the direct control and access to four full parametric filters for correcting influences of room acoustics and also access to digital delay for delayed systems up to 2 sec. The digital signal processing causes a latency below 1msec. For larger systems, complex audio networks or fixed installations, the D1 amplifiers is remotable via Ethernet (TCP / IP protocol). The AD-Net Software supports on easiest way the configuration and setup. For system integration in accordance with EN 60849 / DIN VDE 0828, remote activation, fault message contact for analogue evaluation of the operating status, load monitoring, etc. is integrated.
Specifications Power per channel 8 Ω: 1.000 W 4 Ω: 1.800 W 2 Ω: 3.000 W SNR > 110 dBr Circuit Design ClassH, 3steps Power supply 2 seperate power switching supplies Dampingfactor > 600 DSP 96 kHz / 24 Bit DAC MAns connector Powercon AD-Remote-Net Ethernet Dimensions 2HE x 19" x 43 cm Weight 13 kg Connections 2xNL4

The completely newly constructed system amplifier D1 of the new ImpulsD amplifier series is the core of our sound systems. Integrated component of the D1 is a digital signal processor for the speakermanagement of the connected systems and the DSP is responsible for to check the status and function of the amplifier. Basic settings as preset election, routing, delay, system and room EQ‘s can be edited with the display and the encoders.

The digital signal processing has a resolution of 24bit and works with a sampling frequency of 96 kHz. The user has the direct control and access to four full parametric filters for correcting influences of room acoustics and also access to digital delay for delayed systems up to 2 sec. The digital signal processing causes a latency below 1msec. For larger systems, complex audio networks or fixed installations, the D1 amplifiers is remotable via Ethernet (TCP / IP protocol). The AD-Net Software supports on easiest way the configuration and setup.

For system integration in accordance with EN 60849 / DIN VDE 0828, remote activation, fault message contact for analogue evaluation of the operating status, load monitoring, etc. is integrated.